Military Air Conditioning Systems

RTU-2 MIL

Extremely small, light weight and powerful
  • First ACU with SCT- Smart Compressor Technology®
  • “READY TO USE” - Build in compressor
  • “ONE FOR ALL” - Multi voltage input AC or DC
  • “PLUG & COOL” -Quick install, ready filled with gas
  • Available also with hydraulic driven compressor
  • Extremely robust design to operate in harsh environmental conditions
  • For extreme temperatures : - 40°C to +60°C in operation
  • EMC Compliant : (only RTU-2 MIL version)
  • Shock I Vibration : (only RTU-2 MIL version)

Ideal for:
  • Special vehicles
  • Containers
  • Shelters
  • Truck and trailers

“PDC“ System® (Power Demand Control)
1 controller can operate up to 8 ACU‘s over CAN bus system. This can provide up
to 64 kW (220.000 BTU/h) of cooling, and 40 kW (136.500 BTU/h) of heating
capacity! The cooling/heating power is controlled automatically depending on actual power requirements. ln case of failure of any unit the system starts automatically other unit(s).

Performance range from 4-64 kW cooling / 5-50 kW heat capacity with
7x redundancy! These enormous performances can be fully controlled as
required! ~ Take only the power that you need and have reserves!


CAN BUS System
  • Quick install: only 1 power and 1 control cable
  • CAN bus controlled over fibre optics (only MIL-461 E models)
  • Fail safe programs: Redundancy, high reliability

INVERTER powered compressors:
  • No high start up currents. This prevents generators against overloads
  • Stepless power regulated compressors
  • Exactly regulation of room temperatures with no hot I cold effects ~ Guarantees a perfect room temperature

PANDA CAPS


All controls for electric and water heating are regulated (stepless)
Dedicated Generator for ECU and Electrical Systems in Container

Electrical performance - up to 25 kW (without ECU)  
Electrical performance - up to 14kW (with ECU)
Extremely low operating sound levels
Compact design mounted on slides for easy access to components
Water-cooling for engine and generator

System heating sources can be used for preheating increase efficiency
Voltage stability and short circuit protection
Operation in extreme temperatures -46°C - +60°C

Integrated electrical distribution cabinet
Integrated fuel tank provides 12 hours at full load (auto refill from external source)
Worldwide Service Network


Rapid Setup:
  • Quick release connectors simplify installation
  • Cooling fluids prefilled and tested before delivery
  • Timesaving - no additional assembly work required

Easy to Maintain
'Rapid Replacement System' reduces repair time - assemblies swapped as complete units
Primary air conditioning unit module is fitted with quick release connectors
Replacement parts are prefilled and tested before delivery
Possible to replace assembly without a technician 'on site'
Options for ECU System Expansion:
  • 8kW Cooling performance - variable regulated (10'Container) 
  • 16kW Cooling performance - variable regulated (15 to 20'Container)
  • Additional electric roof heater - 0-12kW stepless regulation
  • Additional electric floor heater with blowers. 0-12kW stepless regulation
  • Additional water boiler up to 24 kW via secondary diesel heater
  • Additional water heater - electric up to 9kW
  • Additional heat recovery from generator up to 40kW (dependant on output generator)

PANDA ECU 6000

Specifically designed for military use. The ECU 6000 with 75.000
BTU capacity ensuring the optimal operating temperature for mission
critical equipment. Compressor operates with no inrush current
which saves up to 42% of energy due to variable scroll under
light load conditions.


Cooling capacity - 75,000BTU (6 Ton)
Heating capacity - 12 KW (40,960BTU / HR)
Voltage - 3 x 208 Volts / 60 Hz or 3x400 Volts / 50Hz
Consumption - max. 15,5 kW
Refrigerant - R134A
Temperatures range - minus 8 deg to 52 deg C
Operation - minus 32 deg to 52 deg C
Storage - minus 40 geg to 60 deg C
Dimensions - 1150 x 678 x 1215 mm
Weight -  (wet)368.2 kg
NBC Ready